Scottish Highlands & Islands postcodes: AB, FK, HS, IV, KA, KW, PA, PH, ZE, LL58-LL78, IM, TR, PO30-41 So if you take a look at the Fiddes Hard Wax Oil Tints or Blanchon Hard Wax Oil Tints there may be a colour with in this range that could be close. You are also able to intermix with in the same range to create a new colour, very, very thorough stiorring is required and the sample tins are the best way to experiment with this option. with hundreds of Pine species, all will give a different final tone to the colour in one way or another. This can be an issue with old floors where the majority of the boards are original but some have been replaced over the years. The replaced boards will react differently with the applied finish and will probably give a different look to the original boards when coloured, even if they are the same species. The difference in colour can usually be made less obvious but may take some experimentation and testing to get it right. What’s the solution?

Thank you for getting in touch with your enquiry. There are not many coloured varnishes on the market, because a better result is nearly always achieved by using a stain to give colour and then a clear varnish to seal and protect. There are a few exceptions to this, white for example, because a clear product over white will nearly always yellow.So what is the best approach when looking to colour wood with a coloured or pigmented wood finishing product? In short, trust your eyes and go with the colour that looks right rather than by the name of a colour. Always keep in mind that the colour of the product on your floor or furniture will likely differ to the example colour swatch on the tin. Another thing to take into account is that when viewing wood finishing and indeed paint colours online, everyone’s monitor is set to a different contrast and colour setting similar to when you see the same TV programme on many TV’s when you walk into a TV shop. Fill any holes, splits or gaps with a Wood Filler or smaller chips with a wax filler. Make sure all the wood has been correctly sanded to a smooth finish and dust. Please note that during particularly busy periods, it may take a little longer to receive your delivery and our carrier may attempt to deliver to you on a Saturday. Apply one moderate coat of Liberon Spirit Wood Dye with a lint-free cloth in the direction of the grain of the wood and then allow to fully dry. More coats can be applied to darken the wood but ensure it is full dry between coats. For some people the walnut looks like mahogany and the mahogany like a cherry. The variations from brand to brand are endless, the only way to tell for sure what the result will be is to try it on your wood. The wood type, age and condition will all impact on the result and this is why we so strongly recommend test areas here at Wood Finishes Direct.

You will not get an exact match there are too many variables with woods for that however if you take a look at the colour swatches, rather than the names of those colours, you could get close. The reason I advice this is often a ‘Light Oak’, for example in one range can look very different in appearance to the ‘Light Oak’ in another range. Different types of wood produce different results. The colour example on the photos may not be a true representation of the actual colour as different woods will produce different shades. Our first average we look at for Colron Refined Georgian medium oak Matt Beeswax 0.4L is to judge it against other products from the same brand, in this case it’s Colron. This tells us that there are a total of 53 Colron products at B & Q. Working days are defined as Monday-Friday 8am-7pm inclusive, excluding Saturday, Sunday and Public Holidays. Next Day & Named Day Delivery

You may also like...

Ensure sure you have sufficient dye to finish the work. Do not mix spirit based dyes with water based dyes or white spirit based dyes. Application of a second coat may lift the first coat. Caution must be taken when using oil based finishes over Liberon Spirit Wood Dye. Old coatings of paint or varnish must be fully removed by sanding or with a suitable paint and varnish remover We do have a really good product from Sikkens that you could take a look at Sikkens Cetol TSI Satin Plus which can be applied over existing finishes if a test area proves positive and has 5 colour options in the range or alternatively the Ronseal Diamond Hard Interior Coloured Varnish Satin which has slight more colour options with 12 available. If you wish to return your item to Robert Dyas, you can do so by one of the following methods: 1. Request a Collection via Robert Dyas Customer Services

This dye is mainly used on unsealed bare woods. If stripping of a previous finish is required, see our helpful guide here. Liberon Fine Wood Stripper with Steel wool, is ideal for this. This is not intended to be a full statement of your rights under the Consumer Contracts Regulations. Full details of your rights are available from your Local Authority’s Trading Standards Office. How To Return A ProductYou can also select a convenient day to receive your delivery by choosing a named day delivery (delivery on working days only). Shake the wood dye tin very well before use and ensure you have enough stain to finish the entire job before starting or it may dry patchy. If more than one tin of dye is required to complete the work, mix the tins together to ensure a consistent colour. Anything of a nature that for hygiene or associated health and safety - this includes the Outdoor Spas, Mattresses and Divan Sets