Kreg K4 Pocket Hole Jig - Adjustable, Versatile Jig for Strong Joints - Create Perfect, Rock-Solid Joints - Easily Adjustable Drill Guides - for Materials 1/2" to 1 1/2" Thick

£9.9
FREE Shipping

Kreg K4 Pocket Hole Jig - Adjustable, Versatile Jig for Strong Joints - Create Perfect, Rock-Solid Joints - Easily Adjustable Drill Guides - for Materials 1/2" to 1 1/2" Thick

Kreg K4 Pocket Hole Jig - Adjustable, Versatile Jig for Strong Joints - Create Perfect, Rock-Solid Joints - Easily Adjustable Drill Guides - for Materials 1/2" to 1 1/2" Thick

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

The core shrouds the bit and supports the workpiece through 100 percent of the drill-stroke, resulting in minimal bit deflection, reduced tear-out, and a clean, pluggable pocket hole. A large clamping recess makes securing your jig to your workbench easy using Kreg multipurpose face clamps or any common bar clamp or C-clamp. If you’ve already done that, your item hasn’t arrived, or it’s not as described, you can report that to Etsy by opening a case.

The Kreg Jig® K4 Master System includes one wood-chip relief hole for every Drill Guide hole, designed to keep the drill bit clear of excess wood chips, minimize drill torque, increase the longevity of your drill bits, and allow you to complete a perfect pocket hole in just one plunge. Our products help you to make clean, consistently high quality screwed joints in wooden workpieces, as used in the construction of, for example,. Personalised advertising may be considered a “sale” or “sharing” of information under California and other state privacy laws, and you may have a right to opt out. Disclaimer: Etsy assumes no responsibility for the accuracy, labelling, or content of sellers' listings and products. Its simple design gives you the confidence you need to get started, and you’ll have your project finished in no time with joints.The Master System adds Face Clamp that helps achieve perfect joints, a versatile portable base, plus a workpiece stop and dust-collection port. The Material Support Stop can be set at any distance from the jig to help you repeat the same pocket holes over and over again. The K4’s rear-mounted clamp was introduced with the first Kreg Pocket-Hole Jig, and the design offers incredible rigidity and uncompromising workpiece holding strength. The three-hole drill guide on this Kreg Drilling Jig lets you make perfectly placed pocket holes in a wide variety of material widths and thicknesses from 1/2" to 1 1/2" in 1/8" increments. The Kreg Pocket-Hole Jig K4 combines precision and adjustability of a proven, time-tested pocket-hole jig trusted by DIYers and pros.

The generous clamping surface along with the rear mounted lever clamp allow for a secure and stable connection of the drill template to your workbench. The 3-hole Drill Guide lets you drill pocket holes in a wide variety of material widths and thicknesses—from 1/2" to 11/2" in 1/8" increments. The Kreg 613663 K4MS Kreg Jig® Master System is a Complete system includes a solid clamp, large clamping recess, dust-collection attachment, material support stop for consistent repeated hole spacings, and removable 3-hole drill guide for use with benchtop and portable bases. The Master System includes a Kreg Jig® K4, Bonus Kreg Accessories: the Kreg Face Clamp, Portable Base, and more.

To enable personalised advertising (like interest-based ads), we may share your data with our marketing and advertising partners using cookies and other technologies. The three-hole drill guide lets you make perfectly placed pocket holes in a wide variety of material widths and thicknesses — from 1/2" to 1 1/2" in 1/8" increments. The three-hole drill guide lets you make perfectly placed pocket holes in a wide variety of material widths and thicknesses — from 12mm to 38mm increments. Depending on the project, the Kreg Pocket-Hole Jig HD can also connect directly to your model K3, K4, or K5 benchtop base for upright drilling.

NOTE: Be sure to check with your local building code authority before using the Kreg Pocket-Hole Jig HD to construct load-bearing objects such as interior walls or deck railings. A snap-in dust-collection shroud (with a 1 1/4" diameter outlet) can be connected to a vacuum system to extract dust right at the source to help prevent drill flutes from packing with debris. The self-tapping tip draws the joint together and holds it tight, so you can create beautiful, durable projects quickly. Of course, it functions just like the original, ensuring accurate, consistent screw placement – the 19mm and 38mm settings work perfectly well on 3/4" and 1 1/2" thick material, respectively, so it makes no practical difference in the results. com, the Sell on Etsy app, and the Etsy app, as well as the electricity that powers Etsy’s global offices and employees working remotely from home in the US.

Finance is provided by PayPal Credit (a trading name of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH). If you’d like to file an allegation of infringement, you’ll need to follow the process described in our Copyright and Intellectual Property Policy. A pin registers in a series of holes, adjusting for material from 1/2" to 1 1/2" thick in 1/8" increments, and the base has a fast-acting toggle clamp and depth-collar setting guides.

New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging .If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop