G Thread (Metric BSPP) Female to NPT Thread Male Pipe Fitting Adapter - Lead-Free (Two 3/4 inch)

FREE Shipping

G Thread (Metric BSPP) Female to NPT Thread Male Pipe Fitting Adapter - Lead-Free (Two 3/4 inch)

G Thread (Metric BSPP) Female to NPT Thread Male Pipe Fitting Adapter - Lead-Free (Two 3/4 inch)

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods


If calipers are handy, a third method is to measure the angle between threads: NPT threads are 60°, while BSP threads are 55°. The official standard changed to the EN 837 when the European Union was formed and they decided to use the same standards in every country.

Hansgrohe is present in 140 countries and manufactures its products in Germany, France, the USA, and China.Another obvious visual: The G connector ends with a small protrusion (nipple), used to center the gasket. As for the “A” or “B” in some name, such as the common G ¼ B connection type, the letter denote lets users know 1) it’s a male thread, as female BSP threads don’t have a final letter, and 2) its tolerance class. In the female mating part of the pressure connection there is a hole with sufficient diameter to locate the male end post without pinching the O ring. The main purpose of the parallel threads is to contain the pressure, which allows for regular installations and removals without damaging the thread. Im trying to put a pressure gauge on a 55 gallon drum ,i put pressure in the tank but not one pressure gauge will work ,i put the gauge on the top of the tank ,right on the lid , and it wont give me the pressure .

Prefixing with G, is equivalent to adding BSP after the pipe size, although BSPP is more strictly correct to define the parallel version. DIN3852-A is used with a bonded seal (also known as a Dowty seal) which is a steel washer that has an elastomer ring bonded to the inside diameter of the washer.I have a pressure sensor for use on air with a G1/4 female process connection and would like to convert it so it can accept 6mm OD tubing. DIN3852-E type pressure fittings include a channelled profile in the sealing face for accepting an elastomer seal. This is the source of the confusion, as people incorrectly think the size refers to the outside diameter of the male thread. It is useful to know their differences – and also how to recognize which type is in use – without having to remove the entire assembly.

If the pressure is not going to exceed 16 bar we would suggest a John Guest PM010612E 6MM x 1/4″ straight threaded to tube adapter fitting. The connector is made of nickel-plated brass, so you can be sure of long-lasting service without any risk of rust or corrosion.

For complete details of the different sizes for this type of process connection, view this National Pipe Thread page. This shower hose mixer valve reducer pipe adaptor can be used for pipe connections in homes, offices, and public facilities. The threaded part(s) of plumbing fittings are usually made to a British Standard Pipe Thread size (BSP).

S. or Canada, the pressure gauge will most likely come with an NPT (National Pipe Tapered) connection. S. and Canada – the pressure gauge will very likely have the straight threads of a British Standard Pipe Parallel (BSPP) connector, denoted by the letter G*. Neither will work, BSP or G parallel threads are not compatible with NPT tapered threads, ideally you should use an adapter between the two threads to be sure of a reliable seal between the two different types of thread.At least 41 thread sizes have been defined, ranging from 1⁄ 16 to 18, although of these only 15 are included in ISO 7 and 24 in ISO 228. Some pressure connections also include a tapered shank which assists in the correct alignment of the bonded seal. Due to the spiral leak path, however, Teflon® tape (PTFE) or a sealing compound is required to create a good seal.

  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns


Address: UK
All products: Visit Fruugo Shop